Flow-Max® Pleated Cartridges
For Reduced Filtration Costs
Flow-Max filter cartridges outperform wound, spun, melt blown, resin
bonded and other “depth” type filter elements because our
cartridges are pleated to provide increased surface area and longer life.
Lower pressure drop is another significant advantage, using Flow-Max
pleated cartridges, which allows for increased flow rates and the use
of smaller filter housings to reduce capital equipment costs.
Further savings are provided because our 100% synthetic filter media
is cleanable, five micron and up, to lower cartridge replacement costs.
Flow-Max filter cartridges outperform other pleated elements because
our high performance filter media is systematically produced using 100%
synthetic fibers, with no binders or additives to leave a residue, foam
or contaminate.
Our filter media is dramatically thicker than other products. For this
reason, Flow-Max cartridges provide “depth” filtration for
greater sediment removal, along with more surface area with our pleated
design.
A multi-ply laminate is used with our sub and one micron grades for
longer life and greater solids removal. (See below).
Specifications
Temperature range: 40°F - 140°F (4.5°C – 60°C)
Media: 100% chemical resistant PP, PE and PET, with no binders or additives
Center tubes: PP (standard & BB); PVC, Jumbo
End caps: Plastisol (std & B-B); Molded, Jumbo
Packaging: All cartridges are shrink wrapped for purity
Types
Flow-Max Standard Cartridges are available in a wide range of micron
ratings and lengths, including:
Flow-Max full-flow cartridges for 10" & 20" B-B housings.
Lower Pressure Drop For Higher Flow Rates
Flow-Max cartridges are pleated, so initial pressure drop is significantly
less compared to depth cartridges, such as wound, spun, melt blown and
resin bonded. As a result, higher flow rates are possible, reducing filter
housing size requirements to lower capital equipment costs.
Maximum Flow Rate Guidelines For Flow-Max Cartridges
Washable & Reusable
Flow-Max cartridges are washable and reusable, five micron and up to
reduce filtration costs. For best results, direct spray into pleats to
dislodge sediment. Or, let dry and brush off filter cake from surface
of the media.
All Flow-Max cartridges are individually shrink wrapped for purity.
Flow-Max® Pleated Cartridges
For Long Life& Reduced Filtration
Costs
Flow-Max pleated cartridges outperform wound, spun, melt blown, resin
bonded and other “depth” type cartridges because they are
pleated to provide more surface area and longer life. Low pressure drop
is another advantage, allowing for increased flow rates and the use of
smaller filter housings. Our 100% synthetic filter media is washable
and reusable, five micron and up, to provide reduced filtration costs.
Flow- Max cartridges are available for standard, Big-Blue®, Hurricane™ and
Flow-Max® Jumbo Cartridge filter housings.
Navigating Our Website
Use the links on the menu to the left to explore our website. Each main category
has its own submenu, so watch the menu for changes as you navigate. Click
here to return to the main menu on our home page.
For More Information, Or To Place An Order
Please contact
us for information about additional systems and services, or if you are
ready to place an order. Remember, we can make arrangements for virtually any
water treatment application - all you have to do is ask!
You can also search our website for key words.
|
