See our New Technology at:
www.deferum.com! Click here.

Sea Recovery

North Sea Series

Where there is a need for a commercial reverse osmosis desalinator with tremendous water making capacity, Sea Recovery recommends the "North Sea" Series. Producing fresh drinking water at a rate of 11,000 to 44,000 U.S. gallons (41,639-166,558 litres) per day. Large hotels, cruise ships, and villages rely on Sea Recovery's largest commercial series desalinator. Sold as complete packages, these systems are among the most dependable and easily maintained reverse osmosis desalinators in the world. The North Sea Series are constructed with only the highest quality marine-grade materials and components.

Features

• High efficiency Booster Pump to provide the needed flow and to produce over 30 lbs. of pressure entering the pre-filtration section.
• Multi Media Filter traps suspended solids.
• Extended Life Step Down Dual Parallel/Series Pre-filtration.
• Unique Low Voltage Control Circuitry.
• Exclusive Solid Salinity Meter shows actual product water quality, an essential tool for product water monitoring.
• A failsafe Product Water Diversion Valve that will allow only safe drinking water to enter storage tanks. This prevents salty water (bad water) from contaminating your fresh water supply.
• Dedicated heavy duty Magnetic Latching Relays for each motor integrated in the system.
• The North Sea Systems are shipped from the factory ready to install and function. There are no optional items required, and a complete installation kit is also included.
• Corrosion proof Hour Meter for keeping accurate ship's logs & for timely preventative maintenance.
• Clear inspectable Sea Strainer constructed with a cleanable Monel Mesh Screen filter for ultimate corrosion resistance and large particulate removal.
• Vibration Isolation Mounts Included.
• The North Sea Series Stainless Steel High Pressure Pump is specifically designed for Sea Water Reverse Osmosis Applications.
• Fiberglass Reinforced High Pressure Membrane Vessel eliminates corrosion, is stronger, and more durable. Commercial grade Membrane Element yields higher recovery with greater rejection for more water of higher quality.
• Flow Meters for visual monitoring of the product water flow and feed water flow used to calculate production rates and operation of the system.
• The Compact Design reduces installation space and provides more water in a smaller foot print.
• Remote Controls available.
• High Grade Crank Case Oil to provide longevity of the high pressure pump.
• Stainless Steel exterior and interior Pressure Gauges for accurate measurement of system functions, corrosion resistant, and liquid filled for accurate needle reading.
• All High Pressure Connections are 316 Stainless Steel for maximum corrosion and rust resistance.
• A comprehensive Owner's Manual with exact parts and connection drawings for installation, operation, maintenance, and other pertinent guidelines.
• Worldwide Service and Sales Network for immediate attention regardless of location.
• One-Year Warranty on the System and Membranes.
• Full technical service dedicated to system performance excellence.

Specifications

PERFORMANCE:
RATED PERFORMANCE / PRODUCT WATER PRODUCED:
+-15% at 820 PSIG / 56 BAR, 77^oF / 25^oC & 35,000 PPM TDS typical sea water

Model #	Per Hour	Per Day	Weight of System
42m3 HR/ S2 76m3 HR/ S2 98m3 HR/ S2 121m3 HR/ D2 132m3 HR/ D2 144m3 HR/ D2 144m3 HR/ D2 159m3 HR/ D2 167m3 HR/ D3	458 gal/ 1,735 lit 833 gal/ 3,155 lit 1083 gal/ 4,101 lit 1333 gal/ 5,047 lit 1,458 gal/ 5,520 lit 1,583 gal/ 5,994 lit 1,583 gal/ 5,994 lit 1,750 gal/ 6,624 lit 1,833 gal/ 6,940 lit	11,000 gal / 41,639 lit 20,000 gal/ 75,708 lit 26,000 gal/ 98,420 lit 32,000 gal/ 121,133 lit 35,000 gal/ 132,489 lit 38,000 gal/ 143,845 lit 38,000 gal/ 143,845 lit 42,000 gal/ 158,987 lit 44,000 gal/ 166,558 lit	3700 lbs/ 1678 Kg 4000 lbs/ 1814 Kg 4300 lbs/ 1950 Kg 4200 lbs/ 1905 Kg 4500 lbs/ 2041 Kg 4800 lbs/ 2177 Kg 5100 lbs/ 2313 Kg 5400 lbs/ 2449 Kg 4500 lbs/ 2041 Kg

SALT REJECTION (CHLORIDE ION): Sea Water Systems (SW suffix) Minimum 98.6%, Average 99.2%
High Rejection Systems (HR suffix) Minimum 99.2%, Average 99.6%

PRODUCT WATER TEMPERATURE: Ambient to feed water temperature

SALINITY MONITORING: Automatic electronic monitoring. Temperature compensated with solid state "DOT LED" continuous readout in micromhos per cm³ and of a fail-safe design.

RECOMMENDED CIRCUIT BREAKER: The actual final system configuration may have a large or different size Feed Water Pump and Booster Pump therefore size your Circuit Breaker accordingly. The below chart is an approximation assuming 3 horse power Feed Water and 3 horse power Booster Pumps.

Operating Voltage Hz & Phase	40 hp, HP Pump Motor	Rec. Circuit Breaker Size System With Feed Water & Booster Pump
220 VAC, 50 Hz, Three Phase 380 VAC, 50 Hz, Three Phase 440 VAC, 50 Hz, Three Phase 200 VAC, 50 Hz, Three Phase 208 VAC, 60 Hz, Three Phase 230 VAC, 60 Hz, Three Phase 460 VAC, 60 Hz, Three Phase		125 Amperes 75 Amperes 65 Amperes 140 Amperes 130 Amperes 120 Amperes 60 Amperes

Operating Voltage Hz & Phase	50 hp, HP Pump Motor	Rec. Circuit Breaker Size System With Feed Water & Booster Pump
220 VAC, 50 Hz, Three Phase 380 VAC, 50 Hz, Three Phase 440 VAC, 50 Hz, Three Phase 200 VAC, 50 Hz, Three Phase 208 VAC, 60 Hz, Three Phase 230 VAC, 60 Hz, Three Phase 460 VAC, 60 Hz, Three Phase		150 Amperes 90 Amperes 75 Amperes 160 Amperes 160 Amperes 150 Amperes 75 Amperes

Navigating Our Website

Use the links on the menu to the left to explore our website. Each main category has its own submenu, so watch the menu for changes as you navigate. Click here to return to the main menu on our home page.

For More Information, Or To Place An Order

Please contact us for information about additional systems and services, or if you are ready to place an order. Remember, we can make arrangements for virtually any water treatment application - all you have to do is ask!

You can also search our website for key words.

Subscribe to Our FREE Newsletter,
The WaterCorp Times

Our website, and the technology and services that drive our industry are constantly changing. Please take a moment to subscribe to our FREE periodic newsletter, The WaterCorp Times, which alerts you to updates to this website and provides timely information about water purity and treatment. We never sell or share our subscription list, and you can cancel your subscription at any time (see our privacy policy for details). To subscribe, simply fill out the form below and press the [Submit] button:

First Name:
Last Name:
Email: